Tuesday, January 8, 2013

PICKLES! Just a little yarn fun.

I love the Pickles comic strip especially when the guy gets it right about knitting, crochet, yarn... (c:

http://www.gocomics.com/pickles/2012/09/11
http://www.gocomics.com/pickles/2007/07/02/
http://www.gocomics.com/pickles/2011/12/30
http://www.gocomics.com/pickles/2013/01/08

Monday, January 7, 2013

1st project of 2013 completed!

Granted, I started this project last year, but I finished it on the 4th.  I completed the Bloomster socks found in the first edition of The Sock Report.  They have been blocked and are currently on display at the studio as they were intended as a shop sample.  I knitted them in Solemate by Lorna's Laces in Watercolor.

So, did I have to rip back 10 rows or did I finally sort out that pattern?  By the time I had made the mistake I had completed the pattern at least 2 dozen times.  I knew it was there even if no one else did and I had to fix the mistake.  Very anti my normal knitting philosophy.  I think that it probably wouldn't have unraveled with the lost stitch but I just had to be safe.

After dinner (and a tall glass of potent beer) we ended up needing to leave the restaurant because it was getting too loud to communicate.  Not ready to part ways we found a Starbucks and over a desert coffee we continued our chat.  I pulled my sock out twice while we were drinking coffee but I still wasn't ready to deal with the bird's nest.

Later that night when both the depressant of beer and the stimulant of coffee had worn off I sat down to a mess of needles and string with a bright light hovering somewhere over my head.  Everything became clear.  I dropped off a few stitches that I had picked up erroneously in my attempts to find the missing stitch, I found that missing stitch and worked back up the five stitches wide by ten rows block.  The pattern lay seamlessly before me.  It was a thing of beauty.

I knitted away finishing the final repeat and even got the ribbing on one sock done.  All that was left to do was the other ribbing and bind offs.  That would be for another day.

That day came on Thursday this week.  What also came was learning a new bind off:  Jeny's Surprisingly Stretchy Bind Off.  I opened the book that I was going to use and bound off the first three stitches.  Something wasn't right.  Why would a pattern call for you to do a 2x2 ribbing and bind off with a 1x1 type binding.  I picked up my pattern and realized that the 2x2 ribbing was in my head.  I pulled back the ten rows of ribbing I had completed and started again, yarn to the back knit, yarn to the front purl... ad nauseum.  I ribbed one sock during that open studio and started the bind off again.

Friday was here and with it came the second sock's ribbing and another bind off.  I dunked the socks in Soak and water, eventually rolled them up into a towel and slid them over my homemade sock blockers.  Overall I was very satisfied with the entire process, the pattern was simple but lovely, and it has given me several ideas for new patterns.  A picture will come soon.  I forgot to take one when I finished!

Sunday, December 30, 2012

Sock update...

It has been some time since I was able to spend any amount of energy toward the completion of my most recent pair of socks.  The end is now in site!  I have one more pattern repeat on sock 2 and then the ribbing on both.  The hazards that plauged me at the start of the socks have thankfully not followed.  For the most part at least.  I had not knitted on the socks in weeks because there was the rush to finish up a couple hand made Christmas presents and I'm sure a few more projects I can't think of at the moment.

Yesterday's efforts were more along the lines of figuring out "what the heck did I do?"  The pattern called for five stitches at the beginning of the round before the chart was worked.  I had four.  Four?  What happened to the fifth?  Where did it go?  I didn't drop it in an obvious place, no that would have been too easy.

I looked over the work and scrutinized the pattern placement over the last ten rows.  Somewhere, ten rounds ago the stitch went missing.  Pull back ten rows or figure a way to pick up the stitch?  I sat on a bench inside the entrance to a restaurant where we'd be meeting a friend for dinner.  The lighting was dim but I had to work to try, it was the only project I had with me!

The fix became less about knitting time and more about problem solving.  I thought this pattern was so simple.  Sure it involved a few yarn overs, wrapping stitches a couple times, and even carrying stitches up a few rows but it was THAT hard.  Where could I have made a mistake, and how had I not noticed it for ten rounds?

I saw what might have been a dropped stitch tucked firmly behind a cluster of pattern stitches.  I picked it up with the empty needle and gently nursed enough yarn out of the stitches on either side to form a new stitch.  I worked up ten rows.  Something didn't look right.  I dropped the row I'd just made and tried again.  Still no good.

I was working with five stitches that were the trouble area.  Could I drop these five stitches down and figure out how to rework the pattern from there AND create a new stitch?  Why not.  In that dim light I slipped a stitch off the right hand needle and let it rest in space.  Then I pulled.  Four more stitches followed the first one.  A mass of twisty threads dangled off the back side of the work and challenged me to tame them back into smooth rows.

I leaned forward squinting at the mess.  Was that a stitch?  What about that one?  The four needles that held the rest of the work took their turns being nudged out of half their stitches as I twisted the free needle around and through the bird's nest.  Occasionally when I was working with the tips of the adjacent needles to try to form stitches the one holding the few intentionally dropped stitches would shoot out and plink across the tile floor.  The hostess kept looking at me funny.

Did I mention that I was in a low light restaurant waiting for a friend?  Ten minutes after the time that we were supposed to meet we decided to get a table and order an appetizer... and a beer!  I salvaged what I thought was one stitch but the light at the table was worse so I nursed my beer and tapped my idle fingers on the tabletop.

Maybe I should just rip back the ten rows and be done with it... to be continued...

Friday, December 28, 2012

Crochet Village

A couple of months ago I finished the crocheted barn and silo for the Indianapolis Crochet Guild.  I started it a couple of months plus one week ago.  A great deal of furious crocheting gave me a silo in a couple days the barn took less than 24 hours.

The project was a donation from the Indianapolis Crochet Guild to the Indiana State Museum.  The buildings we donated would be assembled as a "village" around the pendulum clock located in the spiral staircase of the museum.

I had committed to donating the silo but it looked sad and lonely without a barn.  I think I was intoxicated by the completed project which caused me to completely loose my head and imagine that I could finish the barn the next day (the day after that was when it was due).

A pound of red yarn worked with a random pattern of slip stitches, single crochets, half double crochets, and double crochets all through the back loops produced the illusion of irregular siding for the barn walls.

The roof was a half pound of doubles worked at a fever pitch.

When the end was in sight I wrapped what was essentially a "scarf" around my chosen box and found that it was about 8 inches too short.  More yarn, more rows added to both the sides and the roof, and an hour later I was 80% there.  I then picked up stitches along the top of the "ends" of the barn sides then worked back and forth decreasing to a point to fill in the gaps.

A little hot glue and a bit of sewing the pieces to the box with darning needle and yarn produced the completed product.

Except there were no doors... no windows!  How would the horses get in?  How would the owls get out?  During the meeting on Saturday morning I put together doors and attached them with crocheted chains and tacking stitches so that they would be raised off the side of the building.  Windows were a length of chain stitches tacked down in a square.  Complete.

Almost.  I gave a nod to all those lovely quilt designs you find on barns but this one had that crochet twist.  With a little yarn leftover I put together a granny square and tacked it to the eave.

Done.  Really.  Done.

On display in the museum.

My worst fear... I joked about giving the museum "fluffing" instructions. I should have been serious, that's a giant thumb print in the roof of the silo!

You can sort of see the granny square on the eave.

There was some concern as to the pendulum knocking the buildings over. Though it swung close, it never got near enough to do damage.  


Third floor looking down.

More photos can be seen at my flickr page.

Monday, November 26, 2012

S.S.S.


I'm not sending out a sloppy S.O.S. there, although I think I do need help.  Yesterday I attempted to start the dreaded "second sock."  I'm not certain that I am suffering from Second Sock Syndrome, but my lack of productivity would make you think that! 

I started the first sock a few weeks ago and have plodded along peacefully since.  There was a rough start to the sock.  I was learning a new cast on method for constructing toe-up socks, and while I really enjoyed the cast on technique "things" kept happening.  

The first time through produced uneven stitches because I was working from a book that had a picture for one of the wraps on one page and the second wrap on the next.  The first time I attempted this toe entailed wrapping from the index finger, pinching the needles in my left hand while I turned the page with the right, taking the needles back in my right while studying the picture and reading the text, then wrapping from the thumb (yay... two stitches), pinching the needles in the left hand while turning the page back with the right, you get the idea.  I eventually had a sloppy mess of the correct number of stitches.  I pulled my needles and tried again.  Maybe I should just practice a few more times.

Finally it was time, but the hypnotic rhythm that comes from "getting" a cast on technique provided far too many stitches.  I dropped off until I had the correct number of stitches on the needles and they looked quite even.  Only after I turned the beginnings of the toe and attempted to work the first round did I realize that the notation "must be done on circular" was an attempt to help and not an outright challenge to my abilities.  I didn't have a long enough circular needle on me!  I stared down at the two DPNs lovingly wrapped with colorful yarn.  "Well, while I'm here I might as well try," came the ingenious thought from somewhere in the creative side of my brain.  Too bad the other half wasn't so capable.  I stabbed away at the first stitch and knitted happily.  Perhaps it would turn out alright.  Soon I had two stitches, three, and then failure.  I was working across the top needle while the bottom needle's stitches held on precariously until my confidence was at its apex then, like lemmings, they all jumped.

I lie, I did have a circular on me but it was only nine inches long.  Still, needs must when the devil drives, actually that's another lie as I would do anything anytime for the sake of experimentation in knitting.

I smoothly wrapped half the stitches on one DPN while I wound the other half on the nubby circular needle; I was becoming quite adept at this starting technique.  Pulling the circular needle so that half the toe stitches rested on the cable I took up another DPN and knitted off the stitches from the first DPN.  Worked like a dream.  Then I worked off the stitches from the circular onto the first DPN.  I was on a roll and there was now wiggle room to be able to switch, all be it precariously, to four DPNs.  (I wonder now if I could do the whole technique on four DPNs but I digress because I will not need it for this set of socks.)

Away I knitted in pattern; increase row after knit row, the yarn delightfully spooled from the ball quicker and quicker.  A series of mellow stripes appeared row after row and soon the toe was left behind to be, apparently, forgotten.

Three weeks later I made it near enough to the cuff and set aside the first creation, my intent was to work the next sock to the same spot and then keep working up the leg until I’d used up all the yarn.  It was now time for the "second sock," (from somewhere offstage sounds ominous music).

I long ago accepted that the two socks of a pair didn't have to be exactly the same.  I have come completely to terms with this idea and often intentionally make the second sock a different pattern or contrasting color combination altogether.  That said I should also state that this occurred from my first pair of socks and to date I have only made two matching pairs of socks, both a gift to the same person.  Somewhere in that creative side of the mind it was decided that there were just too many sock patterns out there to not try a different one for each sock.  The other half of the brain happily accepted the challenge.  

Despite the fact that they are often used in unison, a sock stands as a complete project.  From cast on to bind off and everything in the middle a sock alone serves its intended purpose but it's a sad solitary life to do so alone.  Many techniques have been developed to help avoid Second Sock Syndrome.  I love to make socks though so I shouldn't have any trouble dialing back the creativity for a few weeks and make a sock to match the one that I had just completed.  This brings me to my second toe.  

Happily I picked up my needles (did I say "needles"?) and started again.  I wrapped and wrapped in the intended technique but all I did was weave the yarn around the two DPNs (yes, I'll get to that).  Again I tried and still not quite right.  So I dabbled with the yarn and needles until I eventually figured it out.  Just to be safe I eventually found my cast on directions and flipping back and forth from page to page I was confident that I had a great start to my “second sock.”  I picked up another DPN and knitted off a stitch, then a second, then a third and a vague memory came flooding back to me.  Eventually I had the right number of stitches in the right style on the right needle (this time one long circular) and off I went on making the toe, increasing every other row until I had 68 stitches.

Two rows of increase later and I had a mess.  I turned my brain off prematurely.  Instead of increasing on the sides as was the stated production of a toe, I increased every other stitch.  I looked at my very strange mass of stitches and silently withdrew the needle.  

The toe is currently working up beautifully.  However, upon waking up this morning I realized something, if I want these two socks to match then I probably need to pull from the same direction on the ball of yarn (it's variegated), start at the same point in the colorway (did I mention variegation?), and try to stick as close to the pattern as possible.  That does take in to account that I actually tried very hard to stick as close to the pattern as possible with the first one.  That also means finishing the first sock completely and not leaving the cuffs to last to use up every last scrap of yarn that I have for the socks.  Maybe I do need to send out an S.O.S.  

Well, at least I know how to do the toe, or perhaps I should try to cast on with four needles this time.  Now where did I put those DPNs? 

Friday, November 9, 2012

Suck it up!

I started a scarf yesterday and after mulling through the instructions and finally figuring out what they wanted me to do I followed the repeat four times and gave up.  I just wasn't into the effect that was being created and due to the fact that it was crochet work my yarn was disappearing at an alarming rate.  It was a light airy scarf that was going to weight about 3 pounds when I was finished.  Not exactly the goal I was trying to achieve.  In reality I was a little disappointed in my inability to deviate from the pattern.  It was very basic and I couldn't figure out a way to make the yarn wander off in its own direction.


So this morning I ripped it out...

by: Terry Border

The neat little center pull ball was more than half used and ended up rewound as an outer pull ball.  Fine, I'll just find a "simple little knit pattern" and run with that.

Mission accomplished, I'm in the possession of that "simple little knit pattern."  



But something has gone wrong.  It's too simple for one thing.  I keep messing up the pattern.  Row 1 and 3 are the same so I keep asking myself:  Is row 2 or row 4 next?  Other than a few of my irregular rows, the pattern has turned out lovely but once again I'm loosing yarn at a rate that is more drastic than I intended.  My planned evening of settling down with a beer and knitting has me drumming my fingers on the desk and contemplating the fate of this yarn.  Perhaps there is another "simple" pattern that isn't quite as ravenous as the last two.  Off to do a bit of research.  Perhaps I should wait to open that beer until I have that pattern.  Combining beer and pattern searching has probably put me into my current situation.


On a cheerier note, the is for A:



Tuesday, November 6, 2012

Monster?

It's hard to be afraid of this little guy when his teeth are stitched out of yarn.  
Perhaps he'll just felt all over you, which sounds worse then what it is.  



This is my version of Baldwin from The Big Book of Monsters by Rebecca Danger.  Overall I liked the basic designs laid out in the book but they all start to look the same after a while.  Personalizing your monster is the most fun.  I dabbled with stripes and color blocks.  The instructions cite being about to use remnants to make the monsters as they take up very little yarn.  In my opinion, the more you can scrap them the better they look.

The patterns are incredibly easy to follow but making the arms and legs was a little bit of a tedious construction.  This is probably due to my choice of yarn and needles.  You drop down sizes from the recommended gauge so as to tighten the stitching but I don't think I dropped enough sizes.  The body is still very open.  That coupled with using metal needles with Cherub Aran yarn and knitting 9 stitches in the round on the arm on double points had me watching as a bunch of "sleeping" needles went sleep walking!    




Some of the smaller ones run to about 8 inches tall while the bigger ones are pretty much a throw pillow.  The larger Baldwin was supposed to be 17" tall!  


There is a lot that can be done to personalize these monsters.  My favorite part about making this monster was messing up.  I was stitching the top closed and threading the yarn through the body to then snip on the other side and let the tail pull back in so as to be forever lost in the stuffing.  I pulled a little tight and distorted the body, a recoverable situation but it gave me an idea... hmm... it would look neat if this guy had ears, then a nose, then I pinched the mouth on the sides and tucked it back into the body a bit.  Now I'm thinking of making Baldwin a girlfriend, the base monster is already pear-ish shaped.  Shouldn't be too difficult to give him a love of his life.


It was a little bit a challenge finding a place to display the little guy at work.  He tends to just fall over.  His legs are rather stubby and he's very lightweight.  I have a few neodymium magnets that I can slip into the hands so he can put a hug around objects to hang on.  


If you've got a bit of time, knit up one and enter it into the shop contest.  They work up fast and are addictive.  I keep thinking of which one I'd like to make next.  Perhaps we need a coffee monster... to protect it not drink it as that is my job!